Electric pumps are used for known applications. However, we can have the maximum result by opting for the inverter, which guarantees efficiency and high performance.
The inverter is what you need for your electric pump today. It acts on current frequency and not on the voltage.
A new device in terms of technology, the inverter is certainly more advanced than mechanical pressure switches and electronic press-controls.
I am talking about devices that with a microswitch activate the pumps.
But these devices push the pump up to the maximum rpm: this results into an expensive power consumption.
This is why in the presence of pressure switches or press-controls, when the set pressure value is reached (e.g.3.5 bar ) – the pump disconnects.
Each time we open a tap, we determine that pressure drop necessary for the pump to restart.
When starting the electric motor it absorbs more current. But here you are Mister Inverter!
The inverter acts directly on the water flow regulating it constantly, optimizing the use and consumption of our most precious good.
First of all, the inverter starts the pump only based on the amount of water used. Both in the presence of a trickle of water and in the presence of a more abundant flow.
In addition to lower energy consumption and minimal wear on the pump, we avoid water hammers – those noises heard when the flow is irregular.
You will have these and other advantages.
With your Inverter you will be safe from electrical fault, protecting the electric motor and the electric pump by blocking it.
And yet, the protection function is guaranteed even when there is no more water in the tank.
This event coincides with the stop of the cooling process. In these cases, the material that covers the pump body wears out quickly as the components begin to rub.
The result is an inevitable compromise of all parts.
Essential anywhere and for anyone, the inverter is ideal for those who use electric pumps every day. I am thinking of those users who live in places where a higher water pressure is required because otherwise they would risk not even using a boiler.
Users that live far from the main water network are often forced to resort to traditional systems. Such as an autoclave tank.
To be clear, this is a traditional tank operated with mechanical pressure switches or electronic press-controls.
Even when the daily requirement is met, the cost will not be indifferent
Indeed, the pump has to make the maximum pressure effort for regular operations.
For all these reasons, the installation of inverters on your electric pump is highly recommended. Because it will make you save money and feel safe, guaranteeing the best management of your electric pump.
With your inverter you will have maximum pressure, with maximum advantage.
We’ll catch up to the next!
[ps_product_list id_product = 143,142,344]